Formula 2x2


The Formula 2x2 is your go to belt for formula type vehicles!

The Formula 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" non adjustable formula lap belts, and individual non adjustable sub straps.

What makes the Formula 2x2 different from the Schroth lineup? The individual sub straps!

The sub-straps loop through the lap belts and latch into the shoulder belts. The classic “D” ring used in previous formula belts has been replaced with sewn in webbing, creating a more light weight and comfortable fit. The sub straps are typically anchored very far rearward, almost to the lap belt mounting points. See Schroth’s installation documents for more mounting information.

This belt is typically used in single seat open wheeled cars with very reclined seating positions. This belt is not recommended for use in traditional road cars, or vehicles with more upright seating positions.

Comes with wrapped bolt-in attachments at all six points. Snap in attachments can be purchased separately.

    • FHR specific 2” shoulder belts
    • 2” Formula non adjustable Lap Belts or Pull Up Lap Belts
    • Individual non adjustable Sub Straps
    • Rotary Cam Lock
  • Components

    • Shoulders: Pull Down 2"
    • Laps: No adjust 2" or Pull Up Laps
    • Subs: No adjust 2"

    End Fittings

    • Shoulder: LV10 with bolt-in bracket wrapped-in
    • Lap: LV10 with bolt-in bracket wrapped-in
    • Subs: LV10 with bolt-in bracket wrapped-in

    Cam Lock Fixed Point

    Right Lap Belt

    Included Hardware

    • (6) SG29 7/16
    • (2) SG39 Backing Plates
    • (12) S3 Wavy Washer

    Homologation

    • FIA 8853-2016
  • Schroth Installation and Operating Instructions for Racing Harnesses

    Download

    Schroth Installation Checklist

    Download
  • Features
    • FHR specific 2” shoulder belts
    • 2” Formula non adjustable Lap Belts or Pull Up Lap Belts
    • Individual non adjustable Sub Straps
    • Rotary Cam Lock
  • Specifications

    Components

    • Shoulders: Pull Down 2"
    • Laps: No adjust 2" or Pull Up Laps
    • Subs: No adjust 2"

    End Fittings

    • Shoulder: LV10 with bolt-in bracket wrapped-in
    • Lap: LV10 with bolt-in bracket wrapped-in
    • Subs: LV10 with bolt-in bracket wrapped-in

    Cam Lock Fixed Point

    Right Lap Belt

    Included Hardware

    • (6) SG29 7/16
    • (2) SG39 Backing Plates
    • (12) S3 Wavy Washer

    Homologation

    • FIA 8853-2016
  • Documents / Spec Sheets

    Schroth Installation and Operating Instructions for Racing Harnesses

    Download

    Schroth Installation Checklist

    Download

Price: $479.00

$0.00

$0.00