Porsche GT3 Profi 3x2


Porsche GT3 belts are designed specifically for street cars with Porsche’s factory One Piece Carbon Buckets.

What makes GT3 belts different? The lap belts use specific sewn-in brackets that fit perfectly on the factory mount on the Porsche carbon buckets. A standard belt would require additional fabrication and a spacer to make them work with the factory seats. These are a bolt-in replacement which is much easier.

Available with Pull-Down lap belts and No Adjust subs only. Shoulders are 3"

If you drive a GT3 Cup car or are driving a Porsche with a fixed back race seat, a standard non Porsche specific harness such as the Enduro 2x2 or Flexi 2x2 would be better suited for your vehicle.

  • Components

    • Shoulders: Pull Down 3"
    • Laps: Pull Down 2"
    • Subs: No Adjust 2"

    End Fittings

    • Shoulder: LV7 Wrap (3" Shoulders)
    • Lap: Sewn-in B43A (GT3 Specific Hardware)
    • Subs: LV10 with B14 Snap-in Bracket Wrapped-in

    Included Hardware

    • (1) SG23 eyebolt and (2) S3 wavy washers for substrap installation
    • (2) B24 bolt in brackets, (2) LV4 2 bar slides, (2) 7/16 pivot sleeves, and (2) 7/16 flat washers for optional bolt in substrap installation
    • (2) SG10 bolts, (2) SG29 bolts, (2) wavy washers, (2) 7/16 pivot sleeves, (2) 7/16 flat washers, (4) spacers for a number of different lap belt installations

    Homologation

    • FIA 8853-2016
  • Competition Instructions

    Download

    Schroth Installation Checklist

    Download
  • Specifications

    Components

    • Shoulders: Pull Down 3"
    • Laps: Pull Down 2"
    • Subs: No Adjust 2"

    End Fittings

    • Shoulder: LV7 Wrap (3" Shoulders)
    • Lap: Sewn-in B43A (GT3 Specific Hardware)
    • Subs: LV10 with B14 Snap-in Bracket Wrapped-in

    Included Hardware

    • (1) SG23 eyebolt and (2) S3 wavy washers for substrap installation
    • (2) B24 bolt in brackets, (2) LV4 2 bar slides, (2) 7/16 pivot sleeves, and (2) 7/16 flat washers for optional bolt in substrap installation
    • (2) SG10 bolts, (2) SG29 bolts, (2) wavy washers, (2) 7/16 pivot sleeves, (2) 7/16 flat washers, (4) spacers for a number of different lap belt installations

    Homologation

    • FIA 8853-2016
  • Documents / Spec Sheets

    Competition Instructions

    Download

    Schroth Installation Checklist

    Download

Part Number Color Price Purchase
SR 94690-0 SR 94690-0 Black $549.00
SR 94690-2 SR 94690-2 Red $549.00