There is a lot of confusion and misconception regarding racing safety seat standards and expiration dates. This technical bulletin will help clarify the different seat belt standards as well as the expiration dates for these different standards. Seat belt manufacturers produce belts that meet either the FIA homologation standards or the SFI standards for seat belts. The FIA is an organization that is based in France and provides rules and regulations for most international forms of racing including F1, World Rally and World Touring Car Championship. SFI is a USA based non-profit organization that issues and administers standards for racing equipment including safety equipment. The SFI foundation safety standards are the predominant safety standard used by most circle track racing organizations in the US including NASCAR, ARCA, USAC, World of Outlaws, and NHRA.
FIA BELTS
Sanctioning organizations can specify FIA standards without a fee to the FIA. Should a legal matter arise with a component meeting an FIA standard, the organization could use their complete compliance with the standard as a defense. FIA will not enjoin in the defense.
The FIA seat belt homologation, FIA standard 8853/98, requires that each element of a belt has an FIA tag with the year of expiration either punched or printed on the tag. The FIA standard is five years starting on January 1 of the year following the year of manufacture. For example, a 6-point seat belt purchased in 2015 will have a FIA tag on all 6 points of that belt stating that the belt is not valid after 2020. This means that a belt purchased in January 2015 would actually be usable for a full six (6) years. The FIA homologation standards require an individual belt to be replaced if the FIA homologation tag does not have a current date or is missing from the belt, the FIA does not require all tags to match in expiration date but they do need to be valid with a readable tag.
FIA homologated belts are typically used in sedan style race cars or open wheel formula cars that are well maintained and see very little exposure to harsh elements such as water, dirt, and mud. This standard is for a 5 or 6 point belts (5point belts will be disallowed by the FIA starting in 2018). The FIA homologation requires seat belts to pass certain breaking loads, elongation rates, abrasion resistance, and corrosion resistance as well as pass a dynamic crash sled test. Nearly all FIA seat belts use polyester webbing instead of nylon webbing. Polyester webbing has a much higher UV resistance than nylon as well as more resistance to water, oil and other contaminants. Polyester webbing is also superior to Nylon webbing in controlling elongation rates with less stretch and 'rubber band effect'. Nylon webbing has a standard elongation of 25% where polyester webbing can be manufactured with specific elongations ranging from 6% to 16% depending on the application requirement. Due to the predominant use of Polyester webbing as well as the typical application for an FIA belt, the FIA homologates the safety of its belts for 5 years plus the year of production. FIA testing and approval procedures are more costly - therefore FIA belts are typically more expensive than SFI belts. Over the useful life of a harness system, the price of an FIA belt, with up to six years validity compared to multiple sets of SFI belts may end up at a break-even or less expensive than the SFI belts over the same period of time. FIA does not permit re-webbing on their seat belts.
SFI BELTS
There are currently 4 different SFI standards for seat belts, these are SFI 16.1, 16.2, 16.5 and 16.6. SFI standard belts are required to pass multiple tests including elongation, webbing breaking strength and body block testing. The 16.5 and 16.6 standards add micro-slip, abrasion resistance tests, and 16.6 further adds individual component tensile tests.
- SFI 16.1 applies a load over the body block of 5,750lbs each on the laps and shoulders and over the complete 5 or 6 point assembly. Webbing test (breaking load) must meet 6,300lbs for laps and shoulders and 1,500lbs for sub straps. SFI labels on left shoulder belt, left lap belt, and sub strap.
- SFI 16.2 (junior-child belt) applies a load over the body block of 3,300lbs each on the laps and shoulders and over the complete 5 or 6 point assembly. Independent webbing tests (breaking loads) must meet 4,500lbs for laps and shoulders and 1,500lbs for sub straps. SFI label on left shoulder belt, left lap belt, and sub strap.
- SFI 16.5 applies a load over the body block of 11,000lbs over the complete 5 or 6 point assembly. Webbing test (breaking load) must meet 7,000lbs for laps, shoulders and sub straps. Additional tests include a Roller Adjuster Micro-Slip Test, and Webbing Abrasion Test. SFI labels on each shoulder belt, each lap belt, and sub strap. Re-webbing not permitted. Mandated by NASCAR Truck Series, NHRA Top Fuel and Funny Car.
- SFI 16.6 includes all 16.5 requirements with additional individual tensile testing of each sub assembly with loads ranging from 2,500 to 4,500lbs. Only polyester webbing is permitted. Requires a 7 or 9-point belt (additional Negative-G sub strap). SFI labels sewn on each shoulder belt, each lap belt, and sub strap. Re-webbing not permitted. Mandated by NASCAR Sprint Cup and Xfinity series for 2016.
The primary reason for the difference in life expectancy between SFI and FIA belts result mainly from the material (Nylon vs. Polyester) and from the typical usage of the belt by the racer. SFI belts are most common in drag racing, and circle track racing (often on dirt). These belts often see heavy wear and tear in the course of an event and are subjected to the elements such as mud, water, and oil. The entire car (including the belts) are often hosed off after an event (including the belts) and left exposed to the sun. Under such conditions, a belt may no longer be safe after less than a year of use and should be replaced, at the better discretion of the racer, to ensure maximum safety. SFI has conducted extensive testing on seat belt webbing degradation when exposed to UV light, water, and other elements and has determined that a seat belt cannot be used safely for more than 2 years in such conditions. Most SFI 16.1 seat belt uses Nylon webbing which loses as much as 75% of its original tensile strength after 30 months of UV exposure. This is the main reason SFI mandates belts be replaced every 2 years.
SUMMARY
The FIA and SFI create the standards, certify that manufacturers are meeting the standards and defend the standards if their validity is called into question. If a sanctioning body such as SVRA quotes any SFI or FIA standard in their rule book and fully complies with the standard, then the FIA standard can be used as a solid defense. SFI will go so far as to assist in the defense in the event of an accident and litigation. However, if a sanction body does not fully enforce the specified standard, such as allowing SFI belts to be used for more than 2 years, then the sanctioning body is in direct violation of the SFI standard and SFI will no longer support the sanctioning body in the event of litigation. Further it is likely that a good lawyer could claim gross negligence for not enforcing a stated standard.
The metal hardware in a race seat undergoes numerous cycles of loading/unloading during its life time and it is impossible to certify that the hardware is still valid without X-raying each component for cracks. For this reason, it is highly recommended that the entire seat belt assembly is replaced at the end of its life and the hardware not be used again.
The responsibility of the safety of an expired seat belt shifts from the SFI (or FIA) to the sanctioning body and the tech inspector that approved the expired belt to go on track. This opens up the possibility for litigation against both the sanctioning body and the tech inspector with no coverage from the SFI Foundation. This is why it is very important for a sanctioning body such as SVRA, SCCA, NASA, etc to require either SFI or FIA safety standards and to enforce all the rules of those standards including the expiration dates of the belts.