Profi II-6

The Profi II-6 is the perfect solution for a touring car. It features the 2" lap Flexi Lap Belt, the T-bar sub strap and the standard 3" shoulder belts. All points are wrapped in, so you can add almost any end fitting for your specific application. If you're looking for a HANS specific solution, look to the Profi II-6 HANS.

The main premise behind the 2" lap belt is one of added safety. A 2" belt rides within the crest of the human pelvis where a 3" belt would rest on the edges. This allows you to get the belt up to an inch and a half tighter. That means the lap belt will be working earlier in the accident event because it gets loaded faster. It's also more comfortable and easier to adjust becuase there's less friction through the adjuster.

Another feature unique to the Profi Series 2" lap belts is the "Flexi Belt". The End Fittings and Cam Latches are wrapped into the harness, making it so that the lap belt can be changed from a Pull Up configuration to a Pull Down. This allows you to set the belt up just the way you want it for your specific situation. It also allows for Bolt In brackets to be wrapped in for the lap belts if needed. Snap in brackets come standard on the laps.

Comes with Snap-In attachments at Lap and Sub points. The Shoulders come ready to be wrapped around a roll-bar. Snap or Bolt attachments can be purchased separately. Available in Black, Blue, Red, and Silver.

Cam Lock Fixed Point

Anti-Sub Strap

End Fittings

  • Shoulder: LV7 Wrap
  • Lap: LV4 with B14 Wrapped-in
  • Subs: LV4 with B14 Wrapped-in

Included Hardware

  • 4 SG23 7/16" Eyebolts
  • 8 S3 Washers
  • 2 SG39 Reinforcement Plates

Homologation

  • FIA tags standard
Part Color Price Purchase
sr 20012 Black $385.00
sr 20112 Blue $385.00
sr 20212 Red $385.00
sr 20912 Silver $385.00

Profi II-6H

The Profi II-6 HANS is our most popular belt. It is the perfect solution for a touring car. It features the 2" lap Flexi Lap Belt, the T-bar sub strap and the HANS Specific 2"/3" shoulder belts. All points are wrapped in, so you can add almost any end fitting for your specific application.

The HANS specific shoulder belts are designed to make HANS use safer and more comfortable. The belts start as 3" webbing at the cam lock, then after the length adjuster they are 2" webbing which fits completely on the HANS yoke. This gives you the optimal force distribution, entirely on the surface of the HANS. A standard 3" belt will work, however some of the load is not distributed on the HANS. This also can be a comfort issue with some of the webbing falling off the HANS.

Another important feature of the HANS specific shoulder belts is the ability to move the anchor points towards each other to acheive the perfect installation geometry. This will help in the Post-Impact phase - very important in a roll-over situation as well.

The main premise behind the 2" lap belt is one of added safety. A 2" belt rides within the crest of the human pelvis where a 3" belt would rest on the edges. This allows you to get the belt up to an inch and a half tighter. That means the lap belt will be working earlier in the accident event because it gets loaded faster. It's also more comfortable and easier to adjust becuase there's less friction through the adjuster.

Another feature unique to the Profi Series 2" lap belts is the "Flexi Belt". The End Fittings and Cam Latches are wrapped into the harness, making it so that the lap belt can be changed from a Pull Up configuration to a Pull Down. This allows you to set the belt up just the way you want it for your specific situation. It also allows for Bolt In brackets to be wrapped in for the lap belts if needed. Snap in brackets come standard on the laps.

Comes with Snap-In attachments at Lap and Sub points. The Shoulders come ready to be wrapped around a roll-bar. Snap or Bolt attachments can be purchased separately. Available in Black, Blue, Red

Cam Lock Fixed Point

Anti-Sub Strap

End Fittings

  • Shoulder: LV10 Wrap
  • Lap: LV4 with B14 Wrapped-in
  • Subs: LV4 with B14 Wrapped-in

Included Hardware

  • 4 SG23 7/16" Eyebolts
  • 8 S3 Washers
  • 2 SG39 Reinforcement Plates

Homologation

  • FIA tags standard
Part Color Price Purchase
sr 20013 Black $395.00
sr 20113 Blue $395.00
sr 20213 Red $395.00
sr 20913 Silver $395.00

Profi II-6 Titanium

The Profi II-6 Titanium is the top of the Profi Line. Features the 2" lap belt with ultra-low friction Aircraft adjusters, Formula-1 Camlock, Titanium T-bar & shoulder belt latches as well as lightweight Lap Latches and End fittings. Every possible gram has been shaved while keeping the highest level of safety.

The main premise behind the 2" lap belt is one of added safety. A 2" belt rides within the crest of the human pelvis where a 3" belt would rest on the edges. This allows you to get the belt up to an inch and a half tighter. That means the lap belt will be working earlier in the accident event because it gets loaded faster. It's also more comfortable and easier to adjust becuase there's less friction through the adjuster.

The Titanium Profi II-6 does not come with the Flexi belt lap. It is only available in a Pull-Up configuration.

This harness only comes in black and includes the 3" harness pads as well as Snap-in Kits for the shoulders and sub straps. Please note that this harness is available as a special order part. Please allow extended time for delivery.

Cam Lock Fixed Point

Anti-Sub Strap

End Fittings

  • Shoulder: LV17 Lightweight Wrap
  • Lap: Sewn-in Threaded D-Rings
  • Subs: LV4 Wrapped-in

Included Hardware

  • 6 SG23 Eyebolts
  • 12 S3 Wavy Washers
  • 2 SG39 Reinforcement Plates
  • 4 B14 Snap-in End Fittings
  • 2 LV7 3-bar Slides
  • 3" Shoulder Pads

Homologation

  • FIA tags standard
Part Price Purchase
sr 25010 $915.00

Porsche GT3 Belts

Porsche GT3 Cup Cars come with Schroth belts direct from the factory. If you need to replace them because of an accident, or if you're putting the factory GT3 seat setup into another car, you'll want these belts.

They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which is much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.

They are available with Standard 3" shoulders or HANS specific 2"/3" in the colors shown below. Available with Pull-Down lap belts only.

Silver belts are special order.

Cam Lock Fixed Point

Anti-Sub Strap

End Fittings

  • Shoulder: LV7 (3" Shoulders) or LV10 (HANS Specific 2"/3" Shoulders)
  • Lap: Sewn-in B43A (GT3 Specific Hardware)
  • Subs: LV11 with B14 Snap-in Bracket Wrapped-in

Included Hardware

  • 1 SG23 7/16" Eyebolt
  • 1 S3 Wavy Washer

Homologation

  • FIA tags standard

Price: $ 479.00 - 549.00

Select Options



Schroth Enduro Belt

Success in endurance racing depends on durability, quality and speed (quick driver changes). SCHROTH Racing is proud to introduce the newest line of innovative and ground breaking technology. This is, without a doubt, the easiest harness to use on the market. Anyone that has used one has bought one.

Tested this year in the ALMS series and the in the world-famous 24h race around the "Green Hell" at Germany's Nordschleife!

The "Enduro-Belt" is SCHROTH's top-of-the-line racing harness range. For racers and teams looking for the best in seat belt technology! The newly designed adjuster technology "ZIP Adjuster" have been integrated into the lap belt buckle attachments to optimize the position of the adjusters for optimal adjustment. The design of the new "ZIP Adjusters" allows for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes. The same "Zip Adjuster" design can be found the "Enduro" shoulder belts also! The Enduro-Belt is packed with features which will reduce your driver change times! The Enduro-Belts is also a top choice for driving schools or Race-Taxi where getting customers in/out of the car counts! (more driving time!)

Available in black, also available with 2/3" shoulder belt combination (for HANS use only)!

  • Simple and Easy to adjust "ZIP Adjusters" integrated into the lap belt latches
  • "ZIP Adjusters" in the shoulder belts for the best fitting harness
  • Extra large, easy to see Yellow "hand loops" on the lap belts
  • Extra large, easy to grab "hand loops" on the shoulder belts
  • Clearly marked lap belt release straps
  • Sewn in "bungee loops" on the shoulder belts
  • Patented RFR lightweight Buckle
  • 2inch (50mm) lap belts for unmatched comfort and safety

Cam Lock Fixed Point

Anti-Sub Strap

End Fittings

  • Shoulder: LV7 Wrap (3" Shoulders) LV10 Wrap (HANS Specific 2"/3" Shoulders)
  • Lap: LV4 with B14 Wrapped-in
  • Subs: LV4 with B14 Wrapped-in

Included Hardware

  • 6 SG23 7/16" Eyebolts
  • 12 S3 Washers
  • 2 SG39 Reinforcement Plates

Homologation

  • FIA tags standard

Price: $ 579.00 - 589.00

Select Options



Profi 2x2

Say hello to the Profi 2x2, a new SFI 16.1 offering from Schroth Racing. Ditch the old school 3 inch shoulders and bulky adjusters for this new generation of budget friendly harnesses.

Available in 5 or 6 point configurations, this belt is constructed entirely out of 2 inch webbing creating an ideal setup for HANS users. The lap and sub belts can be used with either Bolt or Snap in end fittings, while the shoulders come ready to be wrapped around a roll-bar.

Top it all off with Schroth’s legendary competition style cam lock and this belt is perfect for Lemons, circle track racers, or any driver requiring a SFI 16.1 belt. (NOT FIA HOMOLOGATED)

Cam Lock Fixed Point

Anti-Sub Strap

End Fittings

  • Shoulder: LV7 Wrap
  • Lap: LV7 with B14 or B24 Wrapped-in
  • Subs: LV7 with B14 or B24 Wrapped-in

Included Hardware

  • none

Homologation

  • SFI 16.1 Tags

Price: $ 199.00 - 233.00

Select Options